How it works

Getting started

1. Unpack and set up. An adult should unpack the board. If the acrylic panel has a protective film, peel it off. Place the panel in the LED base and set it on the stand.
2. Connect the power. Plug the USB cable into a USB port, power bank or USB wall adapter. A wall adapter is not included.
3. Draw. Draw on the clear panel with the included markers. To trace, slide a printed picture behind the panel and follow the lines.
4. Light it up. Switch on the light and watch the drawing glow.
5. Wipe and repeat. Switch off and unplug when you're done. Wipe the panel with the included cloth – for dried marker use a slightly damp cloth – and start again.

Care and safety

• Adult supervision recommended. Marker caps are small parts – keep them away from children under 3.
• Never put the base in water, and keep liquids away from the electronics.
• Don't use abrasive cleaners or solvents on the panel.
• Use the markers that come in the box. Test any other marker on a corner first.
• Switch off and unplug the board when it isn't in use.
• Printing and cutting tracing sheets is a job for an adult.

Questions? Email support@zopistore.com.